TAUGHT COURSE PROGRAMMES

 

FACULTY OF ELECTRONICS AND COMPUTER ENGINEERING (FKEKK)

FACULTY OF ELECTRONICS AND COMPUTER ENGINEERING (FKEKK)

 

Programmes Offered Mode of Registration
Duration (years)
Full Time Part Time
 Master of Electronic Engineering (Telecommunication Systems) 1-2 2-4
 Master of Electronic Engineering (Electronic Systems)
 Master of Electronic Engineering (Computer Engineering)
 
 
Programme Structure

(i) Master of Electronic Engineering (Programme Core)


TELECOMMUNICATION SYSTEM
Subjects Credit Hours
 Research Methodology 3
 Engineering and Technology Management 3
 Advanced Digital Signal Processing 3
 Advanced Electronic Design 3
 Advanced TCP/IP Network 3
 Wave Propagation 3
 Antenna Design 3
 Microwave and RF Circuit Design 3
 Project I 4
 Project II 6

Programme Core Credit Hours

34

ELECTRONIC SYSTEM
Subjects Credit Hours
 Research Methodology 3
 Engineering and Technology Management 3
 Advanced Digital Signal Processing 3
 Advanced Electronic Design 3
 Advanced TCP/IP Network 3
 Digital Control 3
 Artificial Intelligence 3
 Advanced Power Electronics 3
 Project I 4
 Project II 6

Programme Core Credit Hours

34

COMPUTER ENGINEERING
Subjects Credit Hours
 Research Methodology 3
 Engineering and Technology Management 3
 Advanced Digital Signal Processing 3
 Advanced Electronic Design 3
 Advanced TCP/IP Network 3
 Computer Architecture 3
 Embedded Software Design 3
 Digital VLSI Design 3
 Project I 4
 Project II 6

Programme Core Credit Hours

34

(ii) Master of Electronic Engineering (Core Course)


**Student has to choose core course subjects only for each specialization

 

TELECOMMUNICATION SYSTEM
Subjects Credit Hours
 Advanced Digital Communication 3
 Satellite Communication 3
 Broadband Wireless Communication 3
 Optical Communication 3

ELECTRONIC SYSTEM
Subjects Credit Hours
 Advanced Control 3
 Discrete Event System                    3
 Sensor Technology 3
 Embedded System Design 3

COMPUTER ENGINEERING
Subjects Credit Hours
 Mixed Analog Signal VLSI Design 3
 IC Testing                  3
 Embedded System Design 3

 

For Further Information
 
Faculty of Electronics and Computer Engineering (FKEKK)
Universiti Teknikal Malaysia Melaka (UTeM),
Hang Tuah Jaya,
76100 Durian Tunggal, Melaka, Malaysia.

Phone    :+606-270 2271
Fax        : +606-270 1045
Email     : fkekk@utem.edu.my
Website : http://portalfkekk.utem.edu.my/web/

 

 

 

FACULTY OF ELECTRICAL ENGINEERING (FKE)

FACULTY OF ELECTRICAL ENGINEERING (FKE)

Faculty of Electrical Engineering offers two taught course programmes:

 Master of Electrical Engineering (MEKG)
 Master of Mechatronics Engineering (MEKH)
Programme Structure

Programme                         : Master of Electrical Engineering (MEKG)

MQF Level                           : 7

NEC Field                            : 522-Electricity and Energy

Mode of Study / Duration  : Full-Time (1-2 years) / Part-Time (2-4 years)

Master of Electrical Engineering (Taught Course) is developed to instill a strong engineering foundation, to produce graduates that are proficient in solving electrical engineering problems. The programme blends the fundamental elements of advanced electrical and mechatronics with industrial and manufacturing related studies, provide the opportunity for student to speciallize in areas related with advanced industrial power, power electronics & drives and control engineering.


 

Section  Course  Field  Credit  
 Compulsory  Research Methodology   3 
 University Elective  Engineering & Technology Management     3

 Programme Core

 Electrical Power System 
   3 
 Modern Control Design   3
 Electrical Machines & Drives   3
 Insulation Coordination & Diagnostic  Testing 
   3 
 Sustainable Energy & Distribution  Generation   3
 Electrical Machines & Drives    3
 Elective
 (choose only one field,
 and Select Any Two
 from the field list)
 Advanced Drive Systems
 Power Electronics & Drives 3
 Electrical Machine Design  3 
 Power Electronics for Renewable Energy 3
 Nonliear Control Systems  Control System Engineering 3
 Intelligent Control 3
 Control Technology & Applications 3
 Power Systems Operation & Control Power System Engineering
3
 Power Systems Protection & Stability 
 3 
 Power Quality & Energy Efficiency
3
 Lightning Protection & Grounding System 3
Master Project I & II     10 
Total Credit hours  40

 

Programme Structure

Programme                         : Master of Mechatronics Engineering (MEKH)

MQF Level                           :  7

NEC Field                            : 523-Electronics and Automation

Mode of Study / Duration  : Full-Time (1-2 years) / Part-Time (2-4 years)

Master of Mechatronics Engineering (Taught Course) is developed to instil a strong engineering foundation, to produce graduates that are proficient in solving mechatronic engineering problems. The programme covers courses such as industrial robotics, Internet of Things-related controllers, mechatronics and control systems.


Section  Course  Field  Credit 
 Compulsory  Research Methodology 3 
 University Elective  Engineering & Technology Management   3

 Programme Core   

 Advanced Mechatronics System Design   3 
 Modern Control Design 3
 Applied System Modelling & Simulation  3
 System Dynamics   3 
 Industrial Machine Vision or Industrial Robotics 3
 Electrical Machines & Drives  3
 Elective
 (choose only one field,
 and select any two
 from the field list)
 Industrial Robotics 

 Mechanical Engineering 

 3 
 Engineering Standards  3 
 System Identification 

 Control System Engineering

3
 Intelligent Control  3
 Advanced Industrial Automation 

 Mechatronic System  

 3 
 Bilateral Motion Control   3 
 Advanced Embedded Systems 

 Internet of Things (IOT) 

 3 
 Industrial Machine Vision   3 
Master Project I & II    10 
Total Credit hours 40

 

Programme Fee

 

 No. 

Postgraduate Programme

Study Mode  

 Mode of Registration (Year)  

Academic Fee  

Full Time  Part Time  Malaysian (RM)   International (RM) 

   1.

 
 Master of Electrical Engineering                                    
 Taught Course 1-2 2-4 6,790 11,290

  2.

 Master of Mechanics Engineering

 Taught Course 1-2 2-4 6,790 11,290

 

For Further Information
 
Faculty of Electrical Engineering (FKE)
Universiti Teknikal Malaysia Melaka (UTeM),
Hang Tuah Jaya,
76100 Durian Tunggal, Melaka, Malaysia.

Phone      : +606-270 2112
Email       : fke@utem.edu.my
Website   : http://www.fke.utem.edu.my

FACULTY OF MECHANICAL ENGINEERING (FKM)

FACULTY OF MECHANICAL ENGINEERING (FKM)

 

Programmes Offered Mode of Registration
Duration (years)
Full Time Part Time
 Master of Mechanical Engineering (Structure Mechanics)
1.5-2.5 3-5
 Master of Mechanical Engineering (Energy Engineering)
 Master of Mechanical (Engineering Automotive)
 Master of Mechanical Engineering (Product Design)
 
 
Programme Structure

  (i) Master of Mechanical Engineering (Energy Engineering)


 

Subjects Credit Hours
 Compulsory Subjects  Research Methodology 3
 University Elective Subjects
 (choose one)
 Entrepreneurship 3
 Engineering & Technology Management
 Project Management
 Quality Systems Management
 Faculty Core  Mechanical System Design 3
 Numerical Analysis 3
 Master Project 10
 Programme Core  Advanced Heat Transfer 3
 Monitoring & Verification 3
 Energy Management 3
 Renewable Energy Technology 3
 Computational Fluid Dynamics 3
 Programme Electives
 (choose one)
 Bio-Fuel Technology 3
 Waste Heat Recovery
 Small Scale Electric Hydro

Total Credit hours

40

 


(ii) Master of Mechanical Engineering (Structure Mechanics)


Subjects Credit Hours
 Compulsory Subjects  Research Methodology 3

 University Elective Subjects

 (choose one)
 Entrepreneurship 3
 Engineering & Technology Management
 Project Management
 Quality Systems Management
 Faculty Core  Mechanical System Design 3
 Numerical Analysis 3
 Master Project 10
 Programme Core  Elastic and Plastic Theory 3
 Finite Element Analysis 3
 Structural Dynamic 3
 Advanced Material Engineering 3
 Programme Electives
 (choose two)
 Structural Impact Mechanics 3
 Experimental Stress Analysis
 Structural Health Monitoring
 Mechanics of Composite Materials 3
 Fatigue & Fracture Mechanics
 Corrosion & Protection

Total Credit Hours

40

  (iii) Master of Mechanical Engineering (Automotive)


Subjects Credit Hours
 Compulsory Subjects  Research Methodology 3

 University Elective Subjects

 (choose one)

 Entrepreneurship 3
 Engineering & Technology Management
 Project Management
 Quality Systems Management
 Faculty Core  Mechanical System Design 3
 Numerical Analysis 3
 Master Project 10
 Programme Core  Green Technology Vehicle 3
 Vehicle Electrical & Electronics System 3
 Intelligent Vehicle Control 3
 Noise, Vibration & Harshness 3
 Programme Electives
 (choose two)
 Automotive Human Factor 3
 Emission Control Technology
 Vehicle Power Train and Driveline
 Vehicle Breaking System
 Tyre Behaviour & Performance Control 3
 Advanced Vehicle Dynamics

Total Credit Hours

40

(iv) Master of Mechanical Engineering (Product Design)


Subjects Credit Hours
 Compulsory Subjects  Research Methodology 3

 University Elective Subjects

 (choose one)
 Entrepreneurship 3
 Engineering & Technology Management
 Project Management
 Quality Systems Management
 Faculty Core 
 Mechanical System Design 3
 Numerical Analysis 3
 Master Project 10
 Programme Core  Computer Aided Engineering 3
 Time Compression Technologies 3
 Fatigue & Fracture Mechanics
3
 Thermal System Design 3
 Programme Electives
 (choose two)
 Industrial & Design Engineering 3
 Human Factors in Design
 Product Reliability & Integrity
 Design for Manufacturing and Assembly

Total Credit Hours

40

 

New Taught Course Programmes

In 2019, Faculty of Mechanical Engineering offers one (1) new taught course programme:

Master of Mechanical Engineering
Programme Structure

 Programme                         :  Master of Mechanical Engineering

MQF Level                           :  7

NEC Field                            :  521 – Mechanics and Metal Work

Mode of Study / Duration  :  Full-Time (1-2 years) / Part-Time (2-3 years)


Category Course Credit
 Compulsory Subjects  Research Methodology 3
 University Elective
 Project Management 3
 Programme Core
 
 Numerical Analysis 3
 Mechanical System Design
3
 Applied Heat Transfer
10
 Applied Engineering Statistics
 Advanced Material Engineering
3
 3D Modelling
3
 Structural Dynamic 3

 Elective

 (choose one only)

 Computational Fluid Dynamics
3
 Solid Mechanics Computer Modelling
 Intelligent Vehicle Control
 Computer Aided Engineering
Master Project I 4
Master Project II 6
Total Credit Hours
40

 

Programme Fee

 

 No. 

Postgraduate Programme

Study Mode  

 Mode of Registration (Year)  

Academic Fee  

Full Time  Part Time  Malaysian (RM)   International (RM) 

   1.

 
 Master of Mechanical Engineering                   
 Taught Course 1-2 2-3 6,790 11,290

 

For Further Information
 
Faculty of Mechanical Engineering (FKM)
Universiti Teknikal Malaysia Melaka (UTeM),
Hang Tuah Jaya,
76100 Durian Tunggal, Melaka, Malaysia.

Phone    :+606-270 4341
Fax        : +606-270 1046
Email     : fkm@utem.edu.my
Website : http://fkm.utem.edu.my/

FACULTY OF MANUFACTURING ENGINEERING (FKP)

 

FACULTY OF MANUFACTURING AND ENGINEERING (FKP)

 

Programmes Offered Mode of Registration
Duration (years)
Full Time Part Time
 Master of Electronic Engineering (Manufacturing System Engineering) 1-3 2-4
 Master of Electronic Engineering (Quality System Engineering)
 Master of Electronic Engineering (Industrial Engineering)
 Master of Electronic Engineering (Precision Engineering)
 Master of Electronic Engineering (Advanced Materials and Processing)
 
 
Programme Structure

(i) Master of Electronic Engineering (Programme Core Subjects)


MANUFACTURING SYSTEM ENGINEERING
Subjects Credit Hours
 Sustainable Product Design and Manufacturing 3
 Advanced Manufacturing Process 3
 Engineering Optimization 3
 Engineering Economy 3
 Master Project 1 4
 Master Project 2 6
 Seminar on Manufacturing Engineering *HW
 Programme Core Credit Hours 22

*HW=Compulsory Attendance


 (ii) Master of Electronic Engineering (Core Course Subjects)


**Student has to choose four core course only (12 credits)

 

MANUFACTURING SYSTEM ENGINEERING
Subjects Credit Hours
 Intelligent Manufacturing 3
 Design of Manufacturing 3
 Lean Manufacturing 3
 Robotics & Automation
3
 Engineering Economy and Decision Analysis 3

INDUSTRIAL ENGINEERING
Subjects Credit Hours
 Production Planning and Control System
3
 Supply Chain Management                3
 Manufacturing Cost and Economy
3
 Industrial and Work System Design
3
 Facilities Planning 3

QUALITY SYSTEM ENGINEERING
Subjects Credit Hours
 Design for Quality 3
 Total Quality Management                 3
 Reliability Engineering 3
 Statistical Quality Control and Six Sigma 3
 Engineering Economy and Cost Analysis 3

PRECISION ENGINEERING
Subjects Credit Hours
 Advanced Metrology                                   
3
 Micromachining Technology                 3
 Computer Aided Engineering 3
 Precision Engineering 3
 Quality and Reliability 3

ADVANCED MATERIALS & PROCESSING
Subjects Credit Hours
 Advanced Technique for Materials Characterization 3
 Corrosion Science and Technology
3
 Non-Destructive Testing of Materials 3
 Materials Design & Selection 3
 Electronics Materials & Devices 3
 Advanced Composites Materials 3

 

New Taught Course Programmes

In 2019, Faculty of Manufacturing Engineering offers one (1) new taught course programme:

Master of Manufacturing Engineering (Advanced Materials & Processing)

 

Programme Structure

Programme                          : Master of Manufacturing Engineering (Advanced Materials & Processing)

MQF Level                            : 7

NEC Field                             : 527-Material Engineering

Mode of Study / Duration   : Full-Time (1-2 years) / Part-Time (2-4 years)


The taught course programme is developed to provides a fundamental understanding of advanced materials properties, their processing, the techniques used for their characterization and computer-based design procedures, which are essential for product commercialization from the concept phase. It also includes the development of new materials and the improvement and application of current materials in new and novel structures.

Section  Course  Credit 
 Compulsory  Research Methodology 3

 University Elective   (Choose one only)

 Engineering & Technology Management, or Entrepreneurship, or Project     Management, or Quality System Management

3

 Program Core
     

 Seminar on Manufacturing Engineering 3
 Sustainable Product Design & Manufacturing  3
 Advanced Manufacturing Process 
3
 Engineering Optimization 3
 Engineering Economy  3

 

 Elective
 (Choose four only)
   
      
 Advanced Technique for Materials Characterization  3
 Surface Science & Engineering  3
 Energy Materials & Devices  3
 Advanced Composites Materials 
3
 Materials Design & Selection  3
 Forensic Materials Engineering
3
   Master Project I & II 10
  Total Credit Hours  40

 

Programme Fee

 

 

 No. 

 

Postgraduate Programme

 

Study Mode  

 Mode of Registration (Year)  

Academic Fee  

Full Time  Part Time  Malaysian (RM)  International (RM) 

1.

 Master of Manufacturing Engineering (Advanced   Materials & Processing)

Taught Course

1 - 2  2 - 4  6,790 11,290 

 

For Further Information
 
Faculty of Manufacturing Engineering (FKP)
Universiti Teknikal Malaysia Melaka (UTeM),
Hang Tuah Jaya,
76100 Durian Tunggal, Melaka, Malaysia.

Phone     :+606-2702571
Fax         :+606-2701047

FACULTY OF INFORMATION AND COMMUNICATIONS TECHNOLOGY (FTMK)

FACULTY OF INFORMATION AND COMMUNICATION TECHNOLOGY (FTMK)

 

Programmes Offered Mode of Registration
Duration (years)
Full Time Part Time
 Master of Computer Science (Internetworking Technology) 1-3  2-4 
 Master of Computer Science (Database Technology)
 Master of Computer Science (Software Engineering)
 Master of Computer Science (Security Science)
 Master of Computer Science (Multimedia Computing)
 
 
Programme Structure

(i) Master of Computer Science (Programme Core)

Subjects Credit Hours
 Theory of Computation 3
 Advanced Human-Computer Interaction 3
 Advanced Data communication & Networks 3
 Computer Architecture & Compiler 3
 Algorithm Analysis and Design 3
 Project I 3
 Project II 6
 Programme Core Credit Hours 24

(ii) Master of Computer Science (Core Course)

**Student has to choose two core course subjects only for each specialization

INTERNETWORKING TECHNOLOGY
Subjects Credit Hours
 Parallel Processing 3
 Advanced Scalable Internetworking 3
 Advanced Network Design and Diagnostics 3
 Distributed Computing Systems 3
 Advanced High Performance Network 3
 Advanced Mobile Computing 3

SECURITY SCIENCE
Subjects Credit Hours
 Public Key Infrastructure 3
 Computer Forensics      3
 Systems and Networking Hacking 3
 Cryptography and Data Security 3
 Intrusion Detection and Prevention 3
 Security Management Practices 3
 Watermarking 3


SOFTWARE ENGINEERING
Subjects Credit Hours
 Advanced Software Engineering 3
 Artificial Intelligence                  3
 Requirement Elicitation 3
 Knowledge Representation & Reasoning 3
 Advanced Topics in Software Intelligent 3

MULTIMEDIA COMPUTING
Subjects Credit Hours
 3D Modeling 3
 Advanced 3D Animation          3
 Computer Graphics & Visualisation 3
 Advanced Audio and Video Technology 3
 Mobile Application Development 3
 Advanced Web Programming 3
 Multimedia Professional Ethics 3
 Multimedia Based Instructional Design 3

DATABASE TECHNOLOGY
Subjects Credit Hours
 Database Programming 3
 Database Administration Security        3
 Mobile Database
3
 Advanced and Deductive Database Systems 3
 Data Warehousing and Data Mining 3
 Advanced Web Programming 3
 Distributed Database 3
 Current Trend of Database Technology 3
 
 
New Taught Course Programmes

In 2019, Faculty of Information and Communication Technology offers three (3) new taught course programmes:

  • Master of Technology (Data Science and Analytics)

  • Master of Software Engineering (Mobile Development)

  • Master of Information System
Programme Structure

 Programme                         : Master of Software Engineering (Mobile Development)

 MQF Level                           : 7

 NEC Field                            : 481- Computer Science

Mode of Study / Duration  : Full-Time (1-2 years) / Part-Time (3-4 years) 


Master of Software Engineering (Mobile Development) is designed to meet the demand for highly skilled mobile apps developer and content experts for platforms such as IOS and Android. The programme is meant to equip the students with content design alongside software development skills that can be applied especially in apps development. The programme’s delivery modes are through lectures, lab session, and industrial projects, emphasise on state-of-the-practice techniques, tools and technology, and recognised methodology through university-industry collaborations. Graduates from this programme will have career opportunities as mobile developer, mobile solution architect and many more.

 

Section  Course  Credit
 Compulsory  Research Methodology 3
 University Elective  Entrepreneurship 3

 Programme Core
     

Native Mobile Development I   3 
 Internet of Things Development      3
 User Experience Design & User Interface Practice
  3 
 Mobile Analytic  3
 Mobile Testing   3 
 Mobile Back-end 3
 Elective
(choose two only)


 Agile Project Management  3
 Mobile App Architecture  3
 Native Mobile Development II   3
 Mobile Security and Privacy   3
   Master Project I & II  10
   Total Credit Hours  40

 

Programme Fee

 

 No. 

Postgraduate Programme

Study   Mode  

 Mode of Registration (Year)  

Academic Fee  

Full   Time  Part   Time  Malaysian (RM)   International (RM) 

  1.

  Master Software Engineering                    (Mobile Development)

Taught Course 1-2  2-4  9,990 16,890

Programme Structure

 Programme                        : Master of Technology (Data Science and Analytics)

 MQF Level                          : 7

 NEC Field                           : 482 (Computer use)

 Mode of Study / Duration   : Full-Time (1-2 years) / Part-Time (3-4 years)


The Master of Technology (Data Science and Analytics) is aimed at recent graduates and industry practitioners from various academic disciplines with strong analytic and computing skills or experiences. The programme is designed to equip students with fundamental and applied knowledge, technical skills, and current technologies in Data Science and Analytics area. These include the fundamental principles of data science, the capability to analyse a diversity of big data, the skills of using data science tools and the capability to apply the data analytics techniques to various domains, as well as the capability to present the analytics results to intended audience. The programme's delivery modes are through lectures, lab sessions, and industrial projects, that emphasize on state-of-the-practice techniques, tools and technology, and recognised methodology through university-industry collaborations.

                                                                                                                          

            Section                                    Course        Credit
 Compulsory  Research Methodology 3
 University Elective  Entrepreneurship 3

 Programme Core 

 Fundamental of Data Science 3
 Big Data Management 3
 Applied Statistical Methods
3
 Applied Machine Learning 3
 Big Data Analytics and Visualization 3
 Modelling and Decision Making 3

 Elective

(choose two only)
 Special Topics in Applied Data Science 3
 Manufacturing Analytics 3
 Social Media Analytics 3
 Geospatial Analytics 
3
 Healthcare Analytics 3
 Tourism Analytics 3
 Customer and Financial Analytics 3
             Master Project I & II 10
             Total Credit Hours 40
  
  
Programme Fee

 

 No. 

Postgraduate Programme

Study   Mode  

 Mode of Registration (Year)  

Academic Fee  

Full Time  Part Time  Malaysian (RM)   International (RM) 
1.
 
 Master of Technology
 (Data Science and Analytics)                                 
Taught Course 1-2 2-4
9,990 16,890

      

Programme Structure

 Programme                        : Master of Information System

 MQF Level                          : 7

 NEC Field                           : 481 (Computer use)

 Mode of Study / Duration : Full-Time (1-2 years) / Part-Time (1.5-4 years)

 

Category  Course  Credit

 Core University
 

 Research Methodology 3
 Entrepreneurship 3

 Programme Core
     

 Business Information Systems
  3 
 Database Systems Management  3
 Information Systems Project Management
  3 
 Information Systems Development  3
 Data Center Management
 3 
 Data Analytics
 3
 Elective
(choose two only)
 Special Topic in Information System  3
 Configuration Management and Maintanance
3
 Information Security and Governance 3
 Healthcare Information System 3
   Master Project I & II  10
   Total Credit Hours  40

 

Programme Fee

 

 No. 

Postgraduate Programme

Study   Mode  

 Mode of Registration (Year)  

Academic Fee  

Full   Time  Part   Time  Malaysian (RM)   International (RM) 
1.
 
Master of Information System                                                
Taught Course 1-2 1.5-4
6,790 11,290

 

FOR FURTHER INFORMATION
 
 Faculty of Information and Communication Technology (FTMK)
 Universiti Teknikal Malaysia Melaka (UTeM),
 Hang Tuah Jaya,
 76100 Durian Tunggal, Melaka, Malaysia.

 Telephone  : +606-270 2411
 Fax            : +606-270 1048
 E-mail        : ftmk@utem.edu.my
 Website     : http://ftmk.utem.edu.my/web/

FACULTY OF TECHNOLOGY MANAGEMENT AND TECHNOPRENEURSHIP (FPTT)

FACULTY OF TECHNOLOGY MANAGEMENT AND TECHNOPRENEURSHIP (FPTT)

 

Programmes Offered Mode of Registration
Duration (years)
Full Time Part Time
 Master of Business Administration (Advanced Operations Management)
2-4 2-6
 Master of Business Administration (Technology and Innovation Management)
 
 
Programme Structure

(i) Master of Business Administration (Programme Core)

Subjects Credit Hours
 Global Management & Organizational Behaviour 3
 Technopreneurship & Industrial Leadership 3
 Economics for Managers 3
 Accounting & Finance For Managers 3
 Marketing Management and Technology 3
 Marketing Management and Technology 3
 Managing Human Side of Technology 3
 Strategic Technology Management 3
 Information Technology and E-Commerce 3
 Research Methodology 3
 Project Paper 6

 Programme Core Credit Hours

36

(ii) Master of Business Administration (Core Course)  

ADVANCED OPERATIONS MANAGEMENT
Subjects Credit Hours
 Advanced Manufacturing and Service Management 3
 Supply Chain Management 3
 Quality Management 3
 Course Core Credit Hours 3
Total Credit Hours 45

TECHNOLOGY AND INNOVATION MANAGEMENT
Subjects Credit Hours
 Technology Forecast 3
 Managing Innovation and Technological Change   3
 Technology Transfer 3
 Core Course Credit Hours 3
 Total Credit Hours 45

 

New Taught Course Programme

  In 2019, Faculty of Technology Management and Technopreneurship offers one (1) new taught course programme:

  • Master of Technovation (MTV)
Programme Structure

 

  • UTeM is offering MTV to meet the needs of professionals who aspire to, or hold management post either in technical or non-technical

    organizations. The proramme was aimed to extend knowledge and competency in key aspects of effective management, such as;

  • Qualities, characteristics and skills of effective managers and leaders;

  • Comptency associated with effective management of policies,processes,people and resources in organizations.

  • Appropriate policies for technology, innovation and operation management in organization.

 

Section
Semester 1 Semester 2 Semester 3
Course

 Credit 

Course  Credit   Course   Credit 
 Compulsory
 Faculty Core   Course      MTVT 5013 Managing   Human Side of   Technology 3
 MTVT 5063 Technology Transfer
3
 MTVT 5023 Managerial   Finance 3
 MTVT 5073 New Product/Service   Development
3
 MTVT 5033 Strategic   Innovation Management 3
 MTVT 5073 New Product/Service   Development
3
 MTVT 50 43 High   Technology Marketing   Strategy 3
 MTVT 5093 Business Law,   Technology  Protection and   Commercialisation
3
 MTVT 5053 Total Quality   Management 3
 MTVT 5104 Research Methodology
4
 Core Course   Programme
 Elective Core   Course
 Total Credit 15 16

Section
                 Semester 1        Semester 2         Semester 3
Course

 Credit 

Course  Credit   Course   Credit 
 Compulsory            
 Faculty Core Course      Research Project 9      
 Core Course Programme            
 Elective Core Course            
 Total Credit            

JUMLAH JAM KREDIT KESELURUHAN

 

                     1
Total credit per semester (12-19 credit)
                     2
> 20 Credit, subject to Dean of Faculty approval

    

Programme Fee

 

No. 

Postgraduate Programme

Study Mode  

 Mode of Registration (Year)  

Academic Fee  

Full Time  Malaysian (RM) 
1.  Master of Technovation  Taught Course 1.5

10,760.00

 

For Further Information
 
Faculty of Technology Management and Technopreneurship (FPTT)
Universiti Teknikal Malaysia Melaka (UTeM),
Hang Tuah Jaya,
76100 Durian Tunggal, Melaka, Malaysia.

Phone    :+606-270 8002
Fax        :+606-270 1043
E-mail    : fptt@utem.edu.my